Description
Flex Coat Finishing Motors
High quality USA built gear motors with self-adjusting chuck for rotating rod while applying and curing Flex Coat finishes.
- 6 RPM standard or slip clutch models for applying finish to rods with under-wraps.
- 18 RPM standard or slip clutch models are good for general use.
- Variable speed DC gearmotor with Slip Clutch (110V plug)
- All models 110VAC
PLEASE NOTE: THESE DRYING AND FINISHING MOTORS ARE SHIPPED DIRECT FROM FLEX COAT
Related Products
Flex Coat Rod Builders Epoxy
Flex Coat
$20.95
Flex Coat Rod Builders Epoxy
This is a professional, clear, high strength, waterproof bonding material.
Perfect for gluing
Flex Coat Power Rod Wrapper
Flex Coat
$459.95
Flex Coat Power Rod Wrapper
A professional power wrapping machine.
Completely wire
Flex Coat Disposable Finishing Brush
Flex Coat
$0.45 - $3.10
Flex Coat Disposable Finishing Brush
Non-Shedding finishing brush
Two sizes avail
Rod Drying/Finishing Motors Corded w/Switch
$18.95
Rod Drying Motors Corded with Switch
Replacement motors for drying machines or use to make your own dryer system.2 Motor speeds a
Flex Coat Rod Building "How We Do It" -DVD
$19.95
Flex Coat Rod Building "How We Do It" -DVD
This DVD takes you through the basic steps of rod building the way we do it. In this video, Roger Seiders, President of Flex Coat,shows you the tools...
