Miscellaneous
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Ferrule Plugs Bulk Pack (100pcs) for Graphite and Glass Blanks
Custom Fly Rod Crafters
$59.99100 Ferrule Plugs for Graphite and Glass Blanks Used for creating a moisture/dirt seal in the male ends of the blanks. Plugs are 3/4"L: 20 each of the 3/8" (.375|10mm top OD) to 1/4" (.250|6mm...$59.99 -
Rod Builders Masking Tape
$2.99 - $3.49Rod Builders Masking Tape Used for holding on guides on blank during wrapping and for building tape arbors under reel seats Three widths: 1/8", 1/4" and 1/2" 60 yds long$2.99 - $3.49 -
Ergonomic Handle Trim Blade Set - #10 Scalpel
$6.99Ergonomic Handle Scalpel Set - 3 Blades Extremely sharp! 3 each #10 surgical scalpel blade with handle <$6.99 -
Ferrule Plugs for Graphite and Glass Blanks
Custom Fly Rod Crafters
$3.99 - $10.99Ferrule Plugs for Graphite and Glass Blanks Used for creating a moisture/dirt seal in the male ends of the blanks. Package of 5 rubber ferrule plugs (all plugs are 3/4"L): One each of the 3/8"$3.99 - $10.99 -
Thin Wire Rod Wrapping Thread Puller 2pk
$3.95Thin Wire Rod Wrapping Thread Puller 2 per package. The quickest and easiest way to tie off your thread wraps! No more pinc$3.95 -
Rod Wrapping Pull Cord
$2.99Rod Wrapping Pull Cord TIP: Leave spool in bag and pull through the zip lock This strong but thin nylon is very similar to the old Gudebrod G-String pull cord. .008 diameter$2.99 -
Alignment Dot Kit
$7.49Alignment Dot Kit Apply alignment dots on your rod in just seconds.Can be applied to any rod, factory or custom. Kit contains:<$7.49 -
Deluxe Thread Pick/Burnisher
$4.49Deluxe Thread Pick/Burnishing Tool Also known as a thread burnishing tools Used for closing thread gaps by burnishing from outside edge of thread wrap to center Tightens wraps and squares threa$4.49 -
O-Ring Replacement for Aluminum Rod Tube Cap-2 Pack
$1.99O-Rings for aluminum rod case cap 2 pack Available in 1-5/8" or 2" diameters NOTE: Store extra o-rings away from sunlight in dark area$1.99 -
Trim Blade Set - #10 Scalpel
$2.99 - $5.99Scalpel Set - Trim Blades Extremely sharp! 3 each #10 surgical scalpel blade with handle$2.99 - $5.99 -
Foil Cup Mixing Kit
$3.29FOIL CUP MIXING KIT These foil dishes help absorb the heat generated by two-part epoxies during mixing,helps extend the epoxy pot life. Also, the epoxy flattens out while in the dish to dissipate...$3.29 -
Foam Reel Seat Arbor
$2.49Urethane Foam Reel Seat Arbor The Forecast urethane foam shims are a perfect fit when building your rod and fitting the reel seat to come in full contact with your blank. Designed for precise fit,...$2.49